








Legionella testing tells you whether your control measures are actually working. Our technicians take samples in line with BS 7592:2022 and HSE guidance, a UKAS-accredited laboratory analyses them, and we give you clear results and practical next steps, anywhere in the UK.
When do you need legionella sampling?
Your legionella risk assessment should tell you. HSE guidance in HSG274 Part 2 sets out when sampling is appropriate, for example where water temperatures or biocide levels are not being maintained, in premises with vulnerable people such as care homes and healthcare settings, after remedial works or disinfection, or when a case of legionnaires’ disease is suspected.
Many low-risk systems will not need routine sampling at all, and we will tell you honestly if yours does not.
We agree a sampling plan with you based on your risk assessment: which outlets, how often, and what is being tested for. Our technicians collect samples on site using the correct method for each outlet and record water temperatures at the same time.
Samples are analysed by a UKAS-accredited laboratory, and you receive your results with a plain-English explanation of what they mean.
What if legionella is found?
HSG274 Part 2 sets action levels for legionella test results in hot and cold water systems. Results above 100 cfu/L mean resampling and a review of your control measures. Above 1,000 cfu/L, your control measures and risk assessment should be reviewed immediately and remedial action taken. We do not just send you a certificate: we explain what the result means and can carry out the remedial works, disinfection and retesting needed to bring your system back under control.

Results are only useful if you know what to do with them. Here is what you get with LFS.
Been told you need legionella sampling? Call us on 0800 080 3045 or send us a message below, and we will come back to you promptly.
Legionella results typically take 10 to 12 days. Samples are analysed by a UKAS-accredited laboratory using a culture method, which needs time to grow and confirm any legionella present. We send your results as soon as they are issued, with a clear explanation of what they mean.
It depends on your water systems, your risk assessment and who uses the building. HSG274 Part 2 gives guidance on frequency, and care homes and healthcare settings usually need sampling more often. We will recommend a schedule that is proportionate to your risk, rather than a one-size-fits-all programme.
It means legionella bacteria were detected in that sample. Under HSG274 Part 2, results above 100 cfu/L mean resampling and a review of your control measures, and results above 1,000 cfu/L mean an immediate review and remedial action. We will talk you through the result and the steps needed to bring your system back under control.
The law requires duty holders to assess and control the risk from legionella, under the Health and Safety at Work Act, COSHH and the HSE Approved Code of Practice L8. Sampling is not required for every system, but it is expected where your risk assessment or HSE guidance calls for it, for example where temperatures cannot be maintained or vulnerable people are present.
Yes. We carry out legionella sampling and testing nationwide, from our head office in Lichfield, Staffordshire. Call 0800 080 3045 to arrange a visit.














For impartial, industry leading advice and assistance on any of our services.